Regular maintenance of your Lexmark printer is vital if you want effective results for a good quality print. One of the best ways to spot print problems or confirm that your printer is working properly is by printing out a test page Whether you’re trying to sort out faded prints, check the toner level or just verify that your printer settings both work and are correct, test pages can be helpful. This guide takes you through two easy ways of printing a test page on your Lexmark printer–either using the printer’s hardware buttons or Lexmark’s own official software.
Why Should You Print a Test Page?
Printing a test page helps you:
- Check Printer Health: Quickly identify issues with ink, toner, or printheads.
- Diagnose Problems: Spot color inconsistencies, faded areas, or hardware errors before they affect your documents.
- Monitor Supplies: View details such as toner or ink levels and your printer’s configuration at a glance.
Method 1: Using the Lexmark Printer’s Buttons
Lexmark printers make it easy to print a test page directly from the device. The exact steps depend on your printer model:
A. Touch Screen Models
- Power On your Lexmark printer and load plain paper.
- Tap the “Settings” button on the touch screen.
- Select the “Reports” option.
- Go to “Menu Settings Page”.
- Tap “Print Test Page” to begin printing.
B. Old Models with LCD Display
- Turn On the printer.
- Press the “Menu” button to enter the main menu.
- Navigate to the “Reports” option.
- Select “Menu Settings Page”.
- Choose “Print a Test Page”.
C. Older Models without LCD Display
- Turn On your Lexmark printer and ensure paper is loaded.
- Immediately press and hold the “Linefeed” button (sometimes labeled “LF”).
- Continue holding the button until the test page starts printing.
What’s Included on the Lexmark Test Page?
The printed test page typically displays your printer model, toner or ink levels, current settings, and important diagnostics—helping you quickly spot any issues.
Method 2: Using Lexmark Printer Software
If you prefer managing your printer from your computer or want additional diagnostic options, Lexmark’s printer software offers another way to print a test page.
Supported Lexmark Software:
- Lexmark P910 Series Utility
- Lexmark MarkVision Professional
Steps to Print a Test Page via Software:
- Open the Lexmark Printer Software
Start your installed utility (such as Lexmark P910 Series Utility or MarkVision Professional). - Go to Settings or Maintenance
Find the “Settings” or “Maintenance” section in the software menu. - Select a Test Page Option
Look for and select one of these options:- “Print Test Page”
- “Nozzle Check”
- “Self-Test”
- Follow On-Screen Instructions
The software will guide you through the process and your Lexmark printer will print a test page.
Troubleshooting Tips
- Nothing Happens When I Try to Print a Test Page:
- Ensure the printer is powered on and connected properly.
- Check for error messages or warning lights on the printer’s panel.
- Try restarting the printer or your computer.
- Test Page Is Faded or Incomplete:
- Check toner or ink levels—replace cartridges if needed.
- Run printhead cleaning from the software if available.
- Make sure you’re using the correct media type.
- Still Have Issues?
- Refer to your Lexmark printer manual or visit the official Lexmark Support Page for further assistance.
Print a Free Test Page Online
Want to ensure your Lexmark printer’s color output is accurate?
Use our free online Print test page tool to check your print quality now!
Final Thoughts
To ensure that your Lexmark printer is kept in top operating condition and to help you sidestep printer problems that might happen unexpectedly take the time to print out a test page on it now and then. whether through the unit’s menu or with official Lexmark software, following these steps is the key to always getting sharp, well-defined printouts.
Still confused with this guide? Leave your questions below or check out our troubleshooting blog for more information.
